Our essential oil distiller is made only for the purpose of distilling essential oils and hydrosols from plants, with steam distillation.
You can opt to purchase the still on its own, or add the essential oil separator which is sold separately. A thermometer can also be purchased additionally and can be installed for you.
This still comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached, and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of. It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.
Capacity: 2 L
Height x Length (cm): 45 cm x 30cm
Materials: Copper & Stainless steel with Brass fitting
Our essential oil distiller is made only for the purpose of distilling essential oils and hydrosols from plants, with steam distillation.
You can opt to purchase the still on its own, or add the essential oil separator which is sold separately. A thermometer can also be purchased additionally and can be installed for you.
This still comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached, and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of. It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.
Capacity: 5 L
Height x Length (cm): 50 cm x 40cm
Materials: Copper & Stainless steel with Brass fitting
Your wish is our command. Our valued customers asked for our own version of an oil separator, and here it is! Our essential oil separator is the perfect addition to your still if you are distilling hydrosols or essential oils.
Your distillate will drop into the PVC tube included with the separator, it will accumulate the oils at the top where it will be easy to extract the oils using a standard plastic syringe (not included) , and the remaining floral waters / hydrosols will slowly come out the other end, into your own recipient, so that your separator never overflows.
Height x Length x Width (cm): 26 cm x 18 cm x 13 cms
Materials: Copper , Brass fitting & PVC tube
Copper Thickness:1 mm
Weight: 1 kg
This product is handcrafted and as such, measurements may vary slightly from the ones listed here.
You will benefit from reduced shipping charges if accessories are ordered simultaneously for a single shipment.
Capacity: 2 L
Height x Length (cm): 45 cm x 30cm
Materials: Copper & Stainless steel with Brass fitting
This premium copper bain marie alembic still comes complete with:
Double copper boiler, Copper helmet with swan neck, Condensing recipient with serpentine coil, quick release brass couplings between the helmet and swan neck and also between the swan neck and condensing recipient, the external chamber includes an entrance with a funnel for filling up with water and a brass plug near the base for discharging water.
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.
The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.
The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
Here at Copper Brothers Online Shop you can find Premium Copper alembic stills from 1 L to 300 L in capacity available for immediate purchase. For larger sizes just email us using our contact form and we will give you a quote for your custom made larger alembic.
This premium copper bain marie alembic still comes complete with:
Double copper boiler, Copper helmet with swan neck, Condensing recipient with serpentine coil, quick release brass couplings between the helmet and swan neck and also between the swan neck and condensing recipient, the external chamber includes an entrance with a funnel for filling up with water and a brass plug near the base for discharging water.
Our Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.
The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
This premium copper bain marie alembic still comes complete with:
Double copper boiler, Copper helmet with swan neck, Condensing recipient with serpentine coil, quick release brass couplings between the helmet and swan neck and also between the swan neck and condensing recipient, the external chamber includes an entrance with a funnel for filling up with water and a brass plug near the base for discharging water.
Capacity: 50L
Height x Length x Width (Cm): 105cm x 119cm x 65cm
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.
The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
Our essential oil distiller is made only for the purpose of distilling essential oils and hydrosols from plants, with steam distillation.
You can opt to purchase the still on its own, or add the essential oil separator which is sold separately. A thermometer can also be purchased additionally and can be installed for you.
This still comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached, and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of. It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.
Capacity: 10 L
Height x Length (cm): 75cm x 50 cm
Materials: Copper & Stainless steel with Brass fitting
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.
The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
Our essential oil distiller is made only for the purpose of distilling essential oils and hydrosols from plants, with steam distillation.
You can opt to purchase the still on its own, or add the essential oil separator which is sold separately. A thermometer can also be purchased additionally and can be installed for you.
This still comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached, and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of. It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.
Capacity: 20 L
Height x Length (cm): 90 cm x 70 cm
Materials: Copper & Stainless steel with Brass fitting
This Premium copper bain marie alembic still comes complete with:
Double copper boiler, Copper helmet with swan neck, Condensing recipient with serpentine coil, quick release brass couplings between the helmet and swan neck and also between the swan neck and condensing recipient, the external chamber includes an entrance with a funnel for filling up with water and a brass plug near the base for discharging water.
Capacity: 100L
Height x Length x Width (Cm): 135cm x 160cm x 75cm
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.
