placa electrica

Recommended for your still

Electric hotplate 500 W voltage selection switch 115/230V

€95.00

The perfect heat source for your small copper still, this electric hotplate will work with 115 / 230 V , works both in Europe and in USA / Canada.

Ideally for copper pots of 1 L – 3 L capacity. May not be strong enough to heat stills that are larger than this.

 

DESCRIPTION

– 500W  electric plate that includes a voltage selection switch 115/230V and temperature regulator –  Manufactured in Germany / CE approved

Please set the correct voltage for your country – voltage switch is found at the bottom of the hotplate. Please note the hotplates come with a European plug, US or UK plug adapter not included.

 

 

You will benefit from reduced shipping charges if accessories are ordered simultaneously for a single shipment.

You may also like

Essential Oil Distiller 2 L

€319.00
Our essential oil distiller is made only for the purpose of distilling essential oils and hydrosols from plants, with steam distillation. You can opt to purchase the still on its own, or add the essential oil separator which is sold separately. A thermometer can also be purchased additionally and can be installed for you. This still comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached,  and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of.  It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.  
  • Capacity: 2 L
  • Height x Length  (cm): 45 cm x 30cm
  • Materials: Copper & Stainless steel with Brass fitting
  • Copper Thickness: 1.1 mm
  • Weight: 2.5 Kg
   

Premium Copper Flip Top Column Alembic Still 2 L

€215.50
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.   The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
  • Capacity: 2L
  • Height x Length x Width (cm): 51cm x 46cm x 16cm
  • Materials: Copper & Brass Handles
  • Copper Thickness: 1 mm
  • Weight: 2.5 Kg

Premium Copper Soldered Alembic still 2L

€114.47
This Premium Copper Soldered alembic still is equipped with a copper pot, soldered union construction, a swan neck lid, a lyne arm with brass union connecting to the condensing recipient, serpentine coil as well as water inlet and outlet on the condenser.  
  • Capacity: 2L
  • Height x Length x Width (cm): 32cm x 37cm x 16 cm
  • Materials: Copper & Brass Handles
  • Copper Thickness: 1 mm
  • Weight: 1.5Kg

Premium Copper Flip Top Column Alembic Still 3L

€232.99
Our Premium Copper Flip Top Column Alembic Still includes a copper pot with soldered union construction, a rotating column attached to the pot with a metal support, which can be used or tipped to the side when you wish to use the alembic traditionally, a swan neck lid, an extension pipe and a condensing recipient with serpentine coil.   The extension pipe is provided to compensate for the increased height of the column. It is connected between the lyne arm and the condenser. When you wish to use the alembic without the column, simply tip the column to the side and remove the extension pipe, connecting the lyne arm directly to the condenser.
  • Capacity: 3L
  • Height x Length x Width (cm): 53cm x 48cm x 18cm
  • Materials: Copper & Brass Handles
  • Copper Thickness: 1 mm
  • Weight: 3 Kg

Premium Copper Soldered Alembic still 3L

€125.36
This Premium Copper Soldered alembic still is equipped with a copper pot, soldered union construction, a swan neck lid, a lyne arm with brass union connecting to the condensing recipient, serpentine coil as well as water inlet and outlet on the condenser.  
  • Capacity: 3L
  • Height x Length x Width (cm): 34cm x 40cm x 18 cm
  • Materials: Copper & Brass Handles
  • Copper Thickness: 1 mm
  • Weight: 1.5Kg

Premium Copper Soldered Alembic still 1L

€104.37
This Premium Copper Soldered alembic still is equipped with a copper pot, soldered union construction, a swan neck lid, a lyne arm with brass union connecting to the condensing recipient, serpentine coil as well as water inlet and outlet on the condenser.  
  • Capacity: 1L
  • Height x Length x Width (cm): 29cm x 34cm x 14 cm
  • Materials: Copper & Brass Handles
  • Copper Thickness: 1 mm
  • Weight: 0.8Kg

Premium Copper Riveted Alembic still 3L

€147.29
This Premium Copper Riveted alembic still is equipped with a copper pot, riveted union construction, a swan neck lid, a lyne arm with brass union connecting to the condensing recipient, serpentine coil as well as water inlet and outlet on the condenser.
  • Capacity: 3L
  • Height x Length x Width (Cm): 34cm x 40cm x 18cm
  • Material: Copper & Brass Handles
  • Thickness: 1 mm
  • Weight: 1.7 Kg

Premium Copper Riveted Alembic still 2L

€130.89
This Premium Copper Riveted alembic still is equipped with a copper pot,  a swan neck lid, a lyne arm with brass union connecting to the condensing recipient, serpentine coil as well as water inlet and outlet on the condenser.  
  • Capacity: 2L
  • Height x Length x Width (Cm): 29cm x 34cm x 14cm
  • Material: Copper & Brass Handles
  • Thickness: 1 mm
  • Weight: 1.5 Kg

Related Products